Jak tłumaczyć «0 dbm + 0 dbm - 0 dBm 0 dBm»

DBm0

dBm0 is an abbreviation for the power in dBm measured at a zero point of the transmission. dBm0 is used among other things in audio / processing of telephony as it allows seamless integration of analog and digital circuits. In particular, for A-law and μ-law codecs the standards define a sequence which has a 0 dBm0 output. Note 1: the investigation of A-law and μ-law codecs 0 dBm0 definitions is that they have the appropriate 3.14 dBm0 and 3.17 dBm0 maximum signal level, the ratio between maximum available amplitude of the sine wave and the reference 0 dBm0 sine wave amplitude. Note 2: 0 dBm0 is often replaced by or used instead of digital milliwatt or the point of zero transmission level. "Unit" dBm0 is used to describe levels of digital signals. E. G. nominal level transmission in mobile telecommunication in the connection point POI -16 dBm0. The block was due to his colleague dBm. Although digitally represented signals have nothing to do with absolute levels of power and cannot be expressed in dBm, dinosaurs telephonometrie had trouble thinking in levels relative to full scale, so they introduced a completely unnecessary pseudo-digital unit "dBm0". It really connects both the old world of analog telecommunications and the new world of digital communication in a strange and unnatural way. The 0 dBm0 level corresponds to the digital milliwatt DMW is defined as the absolute power level at the point of digital reference of the same signal that will be measured as an absolute power level in dBm, if the reference point of the analog. Absolute power in dBm is defined as 10 log power in MW / 1 MW. When the test impedance is 600 Ω resistive, dBm can be referred to a voltage of 775mV, a result of the reference active power of 1 MW. 0 dBm0 corresponds to an overload level of approximately 3 dBm in the a / D conversion. Given a sine wave the RMS voltage of 0.775.} TIA-810 is: "when a 0.775 volt RMS analog signal is applied to the input of the encoder to 0 dBm0 digital code is present at the digital reference. In General, when a 0 dBm0 digital code is supplied to the decoder, a 0.775 volt RMS analog signal appears at the output of the decoder. More specifically, when 0 dBm0 periodic sequence is given in table 2, MU-law or A-law depending on the case, in the case of a decoder for digital readout, 1 kHz, 0.775 volt RMS sine wave signal at the decoder output. 0 dBm0 is 3.14-3.17 law or mu-law dB below digital full scale." More often used to measure the level of the digital signal dB of full scale, or lyrics. The relationship between dBm0 and the words of the songs, unfortunately, ambiguous. It depends on how you define RMS and peak level in the selected system. Level 0 dBm0 is defined as a particular scheme for discrete systems, see the standards listed below. However, the law coded system, the maximum level of a sine wave in such a system of 3.14 dBm0. The ambiguity if the level is peak or RMS value. Today, in the interpretation of many companies seeking to move to the interpretation of RMS. This means that 3.14 dBm0 = peak 0dBFS and -3dBFS RMS. This also means that the same signal has a peak level of 6.Peak 14dBm0. This means that frequently used the perspective of the level of interconnect -16dBm0 can be converted into -22.14 lyrics of RMS in the legal system of the codec. -22.17 dBFSrms in μ-law codec system.